SolarShine’s 250L compact high pressured solar water heater with flat plate collectors can supply hot water 24 hours, their features include simple installation, full automatic controller. The flat plate collectors are high efficiency with black chrome coating surface, and the tank keep very good insulation performance.
PART |
Model |
TH-250-A4.0 |
1. Water 2. Storage Tank |
Net. Capacity |
250 Liters |
Ext. Size(mm) |
Φ520 x 1870 |
|
Inner material |
SUS304 2B 1.5mm |
|
Tank out cover material |
SUS201 stainless steel |
|
Insulation |
High density polyurethane / 50MM |
|
3. Solar 4. Collector |
Collector Model* |
C- 2.0/ 2.4- 78 solar collector (Specification see page4-7) |
Collector Size(mm) |
2000x1000x78 |
|
Collector quantity |
2 x 2M2 |
|
Total Collector Area |
4M2 |
|
3.Mounting Stand bracket |
Aluminum alloy mounting stand for flat roof * 1 set |
|
4. Fitting and pipe See the picture at page 2 |
Brass fitting / Valve / PPR circulation pipe * 1set |
|
5. Controller (Optional) See the picture at page 2 |
Full automatic intelligent system controller * 1 set |
|
6. Auxiliary Electric Heater(Optional) See the picture at page 2 |
2KW |
|
20’ container loading quantity |
30 Sets |
SolarShine’s 250L compact high pressured solar water heater with flat plate collectors can supply hot water 24 hours, their features include simple installation, full automatic controller. The flat plate collectors are high efficiency with black chrome coating surface, and the tank keep very good insulation performance.
Sunshine:
The collector shall face due south to ensure that there is no shelter on both sides and above, the sunshine time every day shall be more than 6 hours.
Installation conditions:
1. Conventional flat roof or inclined roof can be installed. Please consult us for special advice if it is glazed tile roof. For balcony wall mounted, it shall be that there is a cold and hot water interface on the balcony, and the outer wall size of the balcony must meet the installation conditions of flat plate collector.
2. The auxiliary electric heating power supply is 220V AC. the external power line shall be RW3 * 1.5mm2 (10a three hole socket) or rvv3 * 2.5mm2, (16a three hole socket) sheathed copper core wire (cannot be installed without ground wire) according to the electric heating specification.