Why install buffer tank on the heat pump water heating system?

Why install buffer water tank? The buffer tank is used in the water system to increase the water capacity of small systems, eliminate water hammer sound, and store cold and heat sources. What is the specific role of the buffer tank? When the circulating water in the air to water heat pump heating system is limited, the host will reach the set temperature in a very short time, at this time the host will stop working, and then in a very short time, the water pump will reach the starting conditions of the host, and the host will start again. The power consumption Z is high when the host starts. Such frequent startup will greatly reduce the service life of the host and increase energy consumption. If the system is equipped with buffer water tank, it is equivalent to increasing the water volume of the system. The system temperature changes steadily, and the number of starts of the host naturally decreases. Its service life will also be greatly extended, saving energy and electricity.

hot water tank for heat pump2

The buffer water tank has another name in the water dispenser dual supply system – coupling water tank, which is mainly used to solve the hydraulic balance problem of the system. The purpose is to separate different circulation pipelines of the heating system, so that all circulation pipelines are not affected by other pipelines. Of course, it is not enough to know the function of the buffer water tank as it plays an important role. The selection of tanks is also very important. The small selection cannot play the role of energy conservation. The large selection can slowly guide the water temperature to drop. After the start, it will cool down for a long time and occupy a large space, so that the water tank system can play its due role. It also solves the selection of tank size, tanks, tank installation, etc.

buffer tanks


Post time: Nov-11-2022