① The water tank of the air source heat pump water heater should match the power of the heat pump host, and there should be no small horse pulling the cart or large horse pulling the cart.
② The air source heat pump water heater should be installed in a well ventilated place so that the heat pump host can absorb more heat and consume less electric energy.
③ The model of the air source heat pump water heater should be selected correctly, and the suitable heat pump host should be selected according to the different operating environment temperature. The air source heat pump water heater can withstand the low temperature of minus 25 ℃, but the air jet enthalpy increasing technology needs to be applied.
④ The installation position of the air source heat pump water heater should be as close as possible to the indoor water consumption point, so as to avoid the energy loss caused by the distance, thus increasing the power consumption.
⑤ Thermal insulation measures shall be taken for the pipes of the air source heat pump water heater to avoid the loss of a large amount of heat energy during the transmission of hot water, thus increasing energy consumption.
⑥ The heating time of the air source heat pump water heater can be designed, and the power consumption in peak and idle hours should be reasonably used. The air source heat pump water heater should be set as an economic mode, and heating should be conducted in the period of low electricity price as much as possible.
⑦ Reasonably set the hot water temperature. The air source heat pump water heater has intelligent water temperature control technology, which can control the water temperature at the most appropriate temperature (reduce the fluctuation range of water temperature) according to the needs of indoor personnel. In winter, do not set the water temperature too high, which can not only achieve the effect of power saving, but also obtain comfortable hot water.
Post time: Aug-08-2022