Except the split air source heat pump central hot water system, we also design this all-in-one heat pump system for you, on this model, you only need to do the simplest installation, because all the necessary equipment including heat pump unit, water tank, circulating pump, water filling valve, booster pump, backwater circulating system… have been installed and fixed on a high strength base in advance.
A diagram of working principle of air source heat pump water heater :
Meanwhile, this type of system can be customized designed and produced according to your customer’s specific requirements, and the unit also has reserved the solar hot water circulation interface, the solar water heater system with collectors can be added to this air heat pump system at any time in the future.
All in one heat pump has the advantages like: fast lifting speed, very simple installation, it can heat the water from 15°C to 60°C by saving around 80% electrical energy than the traditional electric water heater, its use life is from 10 -25 years or longer.
Specification of all-in-one heat pump hot water system:
Model |
KYT-0.8T |
KYT-1.5T |
KYT-2T |
KYT-2.5T |
KYT-3T |
KYT-4T |
KYT-5T |
Tank capacity |
0.8 |
1.5 |
2 |
2.5 |
3 |
4 |
5 |
Heat pump |
2HP |
2.5-3HP |
3-5HP |
3-6.5HP |
5-10HP |
6.5-10HP |
6.5-10HP |
Suitable for users |
15-23 |
24-35 |
36-45 |
46-60 |
55-75 |
80-120 |
100-140 |
Suitale ambient |
-20℃-40℃(Need low-ambient heat pump for super-cold climate regions) |
||||||
Circulation pump |
(As specific requirements) |
||||||
Filling valve |
Motorized valve(DN15/20/25) |
||||||
Booster pressure |
Intelligent automatic Variable frequency pump |
||||||
Back water |
Intelligent automatic temperature and timing back water |
- Energy Saving: comparing with conventional water heaters such as gas/oil boilers and electricity resistance water heaters, it is maximum up to 75% energy saving,
- Very low running cost: it only consumes a little energy for the compressor working.
- Eco-friendly: no exhaust gas, no wastewater drained to harm environments.
- Powder coated steel plate cabinet (stainless steel cabinet available)
- It has 24 hours timer clock, no human attendance is required once the unit is started.
- Maximum water temperature can reach 60°C
- Simple installation and requires much less installation space.
- It is designed for all commercial applications (such as hotels, hospitals and college/factory residences hot water heating).