Except the split air source heat pump central hot water system, we also design this all-in-one heat pump system for you, on this model, you only need to do the simplest installation, because all the necessary equipment including heat pump unit, water tank, circulating pump, water filling valve, booster pump, backwater circulating system... have been installed and fixed on a high strength base in advance.
Meanwhile, this type of system can be customized designed and produced according to your customer’s specific requirements, and the unit also has reserved the solar hot water circulation interface, the solar water heater system with collectors can be added to this air heat pump system at any time in the future.
All in one heat pump has the advantages like: fast lifting speed, very simple installation, it can heat the water from 15°C to 60°C by saving around 80% electrical energy than the traditional electric water heater, its use life is from 10 -25 years or longer.
Specification of all-in-one heat pump hot water system:
Model |
KYT-0.8T |
KYT-1.5T |
KYT-2T |
KYT-2.5T |
KYT-3T |
KYT-4T |
KYT-5T |
Tank capacity |
0.8 |
1.5 |
2 |
2.5 |
3 |
4 |
5 |
Heat pump |
2HP |
2.5-3HP |
3-5HP |
3-6.5HP |
5-10HP |
6.5-10HP |
6.5-10HP |
Suitable for users |
15-23 |
24-35 |
36-45 |
46-60 |
55-75 |
80-120 |
100-140 |
Suitale ambient |
-20℃-40℃(Need low-ambient heat pump for super-cold climate regions) |
||||||
Circulation pump |
(As specific requirements) |
||||||
Filling valve |
Motorized valve(DN15/20/25) |
||||||
Booster pressure |
Intelligent automatic Variable frequency pump |
||||||
Back water |
Intelligent automatic temperature and timing back water |