Model |
KGS-3 |
KGS-4 |
KGS-5-380 |
KGS-6.5 |
KGS-7 |
KGS-10 |
KGS-12 |
KGS-15 |
KGS-20 |
KGS-25 |
KGS-30 |
|
Input Power (KW) |
2.8 |
3.2 |
4.5 |
5.5 |
6.3 |
9.2 |
11 |
13 |
18 |
22 |
26 |
|
Heating power (KW) |
11.5 |
13 |
18.5 |
33.5 |
26 |
38 |
45 |
53 |
75 |
89 |
104 |
|
Power Supply |
220/380V |
380V/3N/50HZ |
||||||||||
Rated water temperature |
55°C |
|||||||||||
Max Water Temperature |
60°C |
|||||||||||
Circulation fluid M3/H |
2-2.5 |
2.5-3 |
3-4 |
4-5 |
4-5 |
7-8 |
8-10 |
9-12 |
14-16 |
18-22 |
22-26 |
|
Compressor quantity (SET) |
1 |
1 |
1 |
1 |
1 |
2 |
2 |
2 |
4 |
4 |
4 |
|
Ext. Dimension (MM) |
L |
695 |
695 |
706 |
706 |
706 |
1450 |
1450 |
1500 |
1700 |
2000 |
2000 |
W |
655 |
655 |
786 |
786 |
786 |
705 |
705 |
900 |
1100 |
1100 |
1100 |
|
H |
800 |
800 |
1000 |
1000 |
1000 |
1065 |
1065 |
1540 |
1670 |
1870 |
1870 |
|
N.W (KG) |
80 |
85 |
120 |
130 |
135 |
250 |
250 |
310 |
430 |
530 |
580 |
|
Refrigerant |
R22 |
|||||||||||
Connection |
DN25 |
DN40 |
DN50 |
DN50 |
DN65 |
Factory needs to provide hot water for employees to take shower, the cost of hot water is big issue that factory needs to consider. As for the cost of hot water, generally small factories maybe are OK, there are few people, and it doesn't cost much; But large factories are different, tens of thousands of people often use hundreds of tons of hot water a day. In a month, only the hot water charge will cost large sum money, which is very uneconomical.
In this case, how to reduce the cost of hot water has become a matter of great concern to the boss. The main way to reduce the cost of hot water is to reduce the heating cost. Therefore, choose more energy-saving hot water equipment is the smart choice. So, what kind of hot water equipment is the most energy-saving? SolarShine’s heat pump is great option for factory hot water heating cost saving!
Heating capacity: < 1000L
Heat pump power: 1.5-2.5HP
Suitable for: family, small hotel
Heating capacity: 1500-5000L
Heat pump power: 3-6.5HP
Suitable for: small and medium size hotel, apartment building, factory dormitory...
Heating capacity > 5000L
Heat pump power : > / = 10HP
Suitable for : big hotel, school dormitory . big hospital...
Air source heat pump main unit: 2.5-50HP or bigger power according to actual requirements.
Hot water storage tank: 0.8-30M3 or bigger capacity according to actual requirements.
Circulation pump
Cold water filling valve
All the necessary fittings, valves and pipe line
Hot water booster pump (To increase pressure of hot water supply to indoor shower and taps...)
Water return controller system (To maintain a certain hot water temperature of hot water pipeline and make sure fast indoor hot water supply)
The configuration (different model) of item 6-7 are according to the actual situations (such as quantity of shower, building floors, etc)
Air energy water heater, also known as "air source heat pump water heater", the air energy water heater" absorbs the low-temperature heat in the air, gasifies the fluorine medium, pressurizes and heats up after compression by the compressor, and then converts the compressed high-temperature heat energy into feed water for heating through the heat exchanger to heat the water temperature.
Air energy water heater has the characteristics of high efficiency and energy saving. Under the same electricity and time, the amount of hot water that can be heated at the same temperature is 4-6 times than that of ordinary electric water heaters, and its annual average heat efficiency ratio is 4 times than that of electric heating, with high utilization energy efficiency.
You have factory hot water heating system need to size? Please contact us for advise.