1HP Air Source Heat Pump Unit for Australian Market

Short Description:

SolarShine’s residential air source 1HP heat pump unit is special designed for Australian Market, it can match with 150L and 200L storage tanks, to compose hight COP heat pump water heaters.

Send email to us

Product Detail

Product Tags

1HP AIR SOURCE HEAT PUMP FOR HEAT PUMP WATER HEATER

This heat pump model is special designed for Australian market, which meets the standard of Australian market with high COP> 4.2, and with double-walled condenser.

double-wall heat pump unit for Australia

SolarShine’s residential air source heat pumps have two 2 types: refrigerant gas direct circulation type and water indirect circulation type.

Both of the two types have the input power ranges from 1Hp to 2.5Hp, heating power from 3.5 to 8KW, customers can choose suitable model according to practical applications.

SPECIFICATION DATA:

Model: KS-1.0-DW
HP: 1HP

Working Power: 920W
Heating Power: 3900W
COP: >4.2

Nominal / Max. Water temperature:55°C / 60°C

Condenser: Double Wall / Plate type
Evaporator: Copper tubes + Aluminum fin / 2 layers for high COP output Internal

Water pump: Shield pipe pump / Max power 93W
Power supply: AC230V/50Hz

Refrigerant: R410A
Fan motor: 25W / Axial flow fan
Operation Ambient Temperature: -7°C - 45°C
Connection size: DN20

Net Weight: 46.5KG
Ext.Dimension(mm): 920X280X490MM

Features:

• Economical and high-efficiency: Save average 80% heating cost than electric heaters.

• Water Circulation: Easy installation and acquaintance.

• Quiet Running: High- efficiency, low noise rotary compressor, low noise fan, the main unit works at extremely quiet condition.

• Intelligent: Full automatic and intelligent controller, no need any manual operation.

Q&A from Customers:

Q 1: What's the important three parameters for air source heat pump?

A: The heat pump water heater has three important parameters: operating power, COP and heating capacity:

heating capacity = operating power * cop

The heating capacity is directly related to the power of the compressor, represents the machine’s capacity. For example:

-1 set 1HP heat pump with operating power 0.9KW, its is COP 4.2, heating capacity will be: 0.9 * 4.2 = 3.78KW

Q 2: How's the over-heating control?

A: There is over-heating temperature protection on the compressor. When the heat pump system is abnormal, the compressor exhausting pressure or exhaust temperature is higher than the safety setting, the heat pump system will shut down automatically and give a fault code to user. The system can be linked to the mobile app via WiFi, users can remote control or know about the situation of the system, if need, users can contact distributor for help.