10KW-220KW Commercial Heat Pump Hot Water Heater

Short Description:

SolarShine’s commercial heat pump unit power ranges is from 3Hp-50Hp, heating output power from 11-220KW.  All with wifi remote control.  Suitable for Hotel, Hospital, School,Factory, Office, etc hot water project water heating system. 


Product Detail

Product Tags

Product Introductions: 

SolarShine’s professional heat pump units are equipped with high quality components, which assure very high COP output. Our commercial heat pump unit power ranges from 3Hp-30Hp, heating output power from 11-110KW.  They are suitable for many types of large central water heating project for hotel room, school dormitory, factory dormitory, hospital, etc.

commercial heat pump 4


Features:


1. High-efficiency, Up to 75% energy saving, compared with conventional water heaters such as gas/oil boilers and electricity water heaters.
2. Economical, less running cost, only consume a little energy for the compressor working.
3. Eco-friendly,no exhaust gas, no waste water drain to harm environments.
4. Powder coated steel plate cabinet ( stainless steel cabinet available).
5. 24 hours timer clock. No human attendance is required

heat pump with wifi

commercial heat pump 9

commercial heat pump 0

air to water heat pump

commercial heat pump heater

Components of the system:

Air source heat pump main unit: 2.5-50HP or bigger power according to actual requirements.

Hot water storage tank: 0.8-30M3 or bigger capacity according to actual requirements.

Circulation pump

Cold water filling valve

All the necessary fittings, valves and pipe line

Hot water booster pump (To increase pressure of hot water supply to indoor shower and taps…)

Water return controller system (To maintain a certain hot water temperature of hot water pipeline and make sure fast indoor hot water supply)

The configuration (different model) of item 6-7 are according to the actual situations (such as quantity of shower, building floors, etc)

central heat pump

What’re the advantages of air to water heat pump?

Because the air energy heat pump mainly uses the heat in the air for heating, not directly for “electricity heat” conversion, plus the air energy heat pump does not use gas, oil, coal and other fuels, the heating process has no open fire, no emissions, so there will be no fire, explosion, poisoning, electricity leakage, gas leakage and other safety hazards when using the air energy heat pump.

At the same time, it is precisely because the air energy heat pump does not directly use electricity to heat cold water, so the heating efficiency of the air energy heat pump is as high as 400%, that is, 1kW electricity generates 4kw heat energy, and heating a ton of tap water (15 degrees to 25 degrees) only needs about 11 degrees electricity.

Features:

1. Air source heat pump is energy saving device.

2. Regular constant temperature and pressure hot water supply to ensure students’ comfort.

4. The whole system is fully automatic control operation, without special guard.

5. The whole hot water pipe network can be designed with a pressurized return water system, only need 5 seconds to get hot water after turn on the tap.

6. The heat pump has high stability, safe use, low operation cost and maintenance cost.

7. Environmental protection, safety.

commercial heat pump 26

commercial heat pump 22

Air Source Heat Pump Water Heating 10kw -60kw for Hotel hospital factory hot water
Air Source Heat Pump Water Heating 10kw -60kw for Hotel hospital factory hot water


  • Previous:
  • Next:

  • Write your message here and send it to us